American Electric Power Line Mechanic C-A in Delaware, Ohio
Line Mechanic C-A
Perform all types of work involved with the installation, rearrangement, maintenance, operation, removal and inspection of electrical transmission and distribution facilities. All items apply to overhead and underground, as applicable. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The Line Mechanic B builds upon the skills, abilities and knowledge learned as a Line Mechanic C (or equivalent).
Assemble, install, maintain, remove and inspect conductors, fixtures and other associated equipment on overhead and underground facilities.
During the first twelve months in this classification assist with work on energized lines and equipment. During this time frame, the employee should progress from direct supervision to immediate supervision as skill level dictates. Also, shall be capable of replacing fuses and operate switching and sectionalizing devices energized at any voltage when working under general supervision.
After twelve months in this classification, while performing work on energized lines and equipment, should progress from immediate supervision to general supervision as skill level dictates.
Install and operate cutouts, line switches, reclosers and other sectionalizing devices; re-fuse line and transformer devices; test de-energized line or equipment, and place or remove grounds.
Install, maintain and switch residential and commercial underground distribution facilities. Locate and correct trouble using cable-locating and fault finding tools and equipment.
Install and maintain multiple street light circuits.
Install three-phase transformer banks on poles, aerial or ground-mounted platforms.
Install three-phase regulator banks and energize or remove them from service.
Install, maintain, operate and remove capacitor banks from service.
Connect, phase out, parallel and adjust voltage on single and three-phase transformer installations.
Locate and correct faults and hazardous conditions on lines and/or equipment.
Perform similar or less skilled work.
Prepare, conduct and facilitate safety meetings.
Direct the work of employees assigned to assist.
Auto req ID:
Education: High school diploma or GED
Experience: Minimum of two (2) years of work experience as Line Mechanic D or equivalent experience as determined by the Company (2 years as C or equivalent for B classification)
Licenses/Certifications: Valid Class A CDL is required
Shall qualify through demonstration, examination, and/or performance appraisal, as determined by the company into correct classification through physical abilities assessment and strength testing.
Must have ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Line Mechanic A) in this family and be qualified through demonstration, examination, and/or performance appraisal, as determined by the company.
Successful completion of the Construction and Skilled Trades (CAST) selection test is required for this position. (A review of employment testing information, test-taking tips, and the CAST Practice Test may be helpful. A link to these materials may be found at www.aep.com/careers by selecting \"Employment Testing\".
Selected candidate must reside no more than 45 miles from reporting location, Delaware Service Center (315 London Rd Delaware, OH 43016), or be willing to relocate to meet requirement within 6 months of hire.
Equal Opportunity Employer | Minorities/Females/Disability/Vets